How to Put Two Consistent Characters in One AI Video Scene

How to put two consistent characters in one AI video scene: a reference sheet per character, count and scale locks in the prompt, and a 60-second two-sibling short.

Why two characters blend in one AI video scene

Most character workflows are built around one identity at a time. When a scene adds a second person, the model usually gets one of three weak inputs: a text description of both people, one image with both faces in it, or a reference for only one of them. In each case the two identities share one anchor, and their features can mix.

Blending. Both characters drift toward one average face.

Swapping. Hair, outfits or props move from one character to the other between shots.

Duplication. A multi-view reference sheet gets copied literally, and the same character appears twice.

Scale drift. A child and a teenager end up the same height, or trade heights between shots.

Shot-to-shot drift. The first shot looks right, and by the third shot the cast looks slightly different.

Four ways to keep two characters apart on TAVOA AI

A reliable way to reduce blending is to give each character its own reference, fixed before you generate the scene. On TAVOA AI there are four routes to a two-character scene, and the choice depends on where you start: an existing performance, a finished clip, a scene of your own, or characters that need to return.

Route

Use it when

Tools

What you need

Motion transfer

You already have a two-person performance and want new characters to perform it

A 4 to 30 second video you own or have rights to, character images

Objects swap

The clip works, but one character needs to be replaced

The clip and reference images of the new character

Cinema Studio 4.0 with separate references

You are creating your own two-person scene

One character sheet per character, props, locations, scene prompts

The same characters need to return across generations and projects

How TAVOA AI handles two characters in one scene

The example: a 60-second short with two siblings

The workflow below follows one project: a 60-second short film about Jerry, 15, and his sister Lucy, 8. They find their father's old toys, press the button on a strange remote and jump from their bedroom to a jungle, a volcano and the North Pole before landing back home.

Scene

Length

Location

References in the shot

1. Bedroom

18 s

Bedroom

Jerry, Lucy, remote, toy box, bedroom

2. Jungle

10 s

Jungle clearing

Jerry, Lucy, remote, panther, monkeys, jungle

3. Volcano

Volcanic crater

Jerry, Lucy, remote, crater

4. Arctic

14 s

North Pole sea ice

Jerry, Lucy, remote, ice

5. Back home

8 s

The siblings are deliberately similar: both have copper-red hair and freckles. Age, height and wardrobe colors keep them apart on screen, which makes this project a useful stress test for blending.

Step 1: Create a character sheet for each character

Left panel: full-body rear view, head and shoes in frame.

Center panel: large frontal face close-up with the full hair silhouette.

Right panel: full-body front view, head and shoes in frame.

Same outfit in every panel, described down to colors and details, on a clean background with soft even light.

The prompts spell out what separates the two characters: age markers, build, height and wardrobe palettes that do not overlap (mustard and denim for Jerry, purple and cream for Lucy).

Jerry character sheet

Lucy character sheet

The jungle scene adds two animal characters, a black panther and a capuchin monkey. They get sheets in the same three-panel format, so they stay consistent next to the siblings.

Black panther character sheet

Capuchin monkey character sheet

Step 2: Generate the props and locations

For important props or locations that need to stay visually consistent across shots, create a separate reference. The remote is in every scene, so its prompt fixes the exact size, materials and a single button color.

Teleportation remote

Toy box

Bedroom location

Jungle clearing location

Volcanic crater location

North Pole blizzard location

Step 3: Write each scene for two characters

The scene prompt should reinforce which identity belongs to each character. All five use the same structure:

A reference block. One line per reference: the tag, the character's name, age, height and key traits, followed by an instruction to preserve that character's reference identity.

A count lock. "Show one Jerry and one Lucy," plus a line that the character sheets carry identity only, so the three panels never turn into three copies of a character.

A scale lock. Both heights are fixed (163 cm and 125 cm), along with the ratio between them: Lucy is about 77% of Jerry's height.

A position lock. The first frame puts each character on a fixed side of the screen, and hands stay consistent, for example the remote in Jerry's right hand.

Timed shots. Each shot has a time range, shot size, camera height and field of view, with hard cuts between shots.

Dialogue with voices. Quoted lines per character, a voice description for each, and an instruction to speak only the quoted lines.

Locations as geography only. Each location line asks for new camera positions, so the location image sets the layout of the space and never becomes the opening frame.

The prompts refer to the assets by tag:

Tag

Asset

@image1

Lucy character sheet

@image2

Black panther character sheet

@image3

Capuchin monkey character sheet

@image4

Bedroom location

@image5

North Pole blizzard location

@image6

Jungle clearing location

@image7

Volcanic crater location

@image8

Jerry character sheet

@image9

Teleportation remote

@image10

Toy box

Scene 1: Bedroom · 18 seconds · references @image8, @image1, @image9, @image10, @image4

Scene 2: Jungle · 10 seconds · references @image8, @image1, @image9, @image2, @image3, @image6

Scene 3: Volcano · 10 seconds · references @image8, @image1, @image9, @image7

Scene 4: Arctic · 14 seconds · references @image8, @image1, @image9, @image5

Scene 5: Back home · 8 seconds · references @image8, @image1, @image9, @image10, @image4

Step 4: Generate the scenes in Cinema Studio 4.0

Open Cinema Studio, switch to Video and select Cinema Studio 4.0.

Click + and add the references for the scene: the character sheets, props and location listed above the prompt.

Paste the scene prompt and check that every tag in its reference block matches an attached image.

Set the look in the Director's Panel (Film setup, Camera, Color palette, Lighting), then set 16:9, the scene duration and sound on.

Click Generate. Cinema Studio 4.0 at 1080p costs 12 credits per second, so the 18-second bedroom scene costs 216 credits and the full 60-second film costs 720.

Repeat for each scene with the same character and prop references, so the cast stays consistent across all five scenes.

The same setup works in Seedance 2.5 on its own: open Video → Seedance 2.5 and add the images under References. For more on the studio, see Meet Cinema Studio 4.0.

Step 5: Check both characters before you move on

Review every clip against the character sheets before generating the next scene.

Compare a close-up of each character with the center panel of their sheet.

Check that the characters did not trade hair, clothing colors or props.

Check the height difference in every wide shot.

Count the characters in every shot: one of each.

Watch each clip to the end: most consistency problems show up around the 5 to 8 second mark.

If something is off, change one thing per retry: the prompt or a reference, never both at once.

If one face drifts in an otherwise usable clip, replace only that character with Objects swap, described below.

In Cinema Studio 4.0 or Seedance 2.5, type @ in the prompt field to pick characters, props and locations by name.

Alternative: repeat a clip's motion with Motion transfer

Use this route when the motion already exists, for example a two-person performance you filmed yourself, and you want your two characters to repeat it.

Add a reference video between 4 and 30 seconds long that you shot or have the rights to use.

Add your characters: up to 30 images from Uploads, AI Influencer, Generations or Liked, for example the character sheets from Step 1.

Turn on the prompt only if you need to describe a specific change.

Choose quality (480p, 720p or 1080p) and click Generate.

Alternative: replace one of the two characters with Objects swap

Use this route when the scene is finished and only one character needs to change: a drifted face, a different second character for a variant, or a recast for another market.

Add the finished clip.

Add reference images of the new character and, optionally, a short description of which character to change.

Generate. The rest of the frame, including the other character, stays as it was.

For more ways to change one element in a finished clip, see How to Change One Element in a Finished AI Video Without Regenerating It.

What the workflow costs

Step

Tool